Material Supply
Fibre cement and cement-bonded particle boards, subframe and framing materials, insulation, EPDM gaskets and membranes, galvanised profiles, anchors and fixings, coatings, repair mortars, silicones, sealants and consumables.
Our facade materials supply unit provides the boards, subframe, insulation, fixings and consumables needed for facade cladding and insulation work from a single source. From our warehouse in Samsun, Turkey CREA Facade Engineering sells fibre cement and cement-bonded particle boards, galvanised L-C-J-M profiles, stone wool, EPS and XPS insulation, EPDM gaskets and membranes, anchors, plugs, screws, rivets, coatings, repair mortars, silicones and sealants. Because we install facades ourselves, we can give technical support on how each product is used in each detail. Send us your list and we will come back to you with prices and delivery details.
Why one source for materials?
On a cladding job where the boards come from one place, the profiles from another and the anchors, screws and sealants from different suppliers, it takes longer and incompatible products can end up in the same system. Buying from a single source makes it easier to check that products work together and to get everything to site in one delivery. With our warehouse up and running, we offer subframe components and consumables for facade and insulation work on this basis.
Product groups
Fibre cement and cement-bonded particle boards
Fibre cement and cement-bonded particle boards (Betopan) for facade cladding, interiors, soffits and floors. We also prepare fibre cement boards surface-machined and tongue-and-grooved to the shape and size you need. We work with products from manufacturers such as Tepepan, Hekimboard and Baunorm.
Subframe and framing materials
Galvanised L, C, J and M profiles to carry facade cladding; we fabricate and sell subframe and framing materials. The profile type and section are chosen according to the cladding material and the project.
Insulation materials
- Stone wool and mineral wool: For ventilated facades, roofs and partition walls.
- EPS: For ETICS external insulation.
- XPS: For foundations, flat roofs and floors.
We work with insulation products and systems from manufacturers such as Revaber, ODE, Capatect, Filli Boya and Weber. For installation, see our insulation page.
EPDM gaskets and membranes
EPDM gaskets for curtain walls, windows and doors; wind barrier and waterproofing membranes for facades and roofs.
Anchors and fixings
Anchors and plugs to suit the wall type, and screws and rivets for installing the subframe and cladding. We supply products from manufacturers such as Hilti, fischer and EJOT. The right anchor must be chosen according to the wall type (reinforced concrete, brick, aerated concrete) and the load it will carry; we give technical support on this.
Coatings, repair mortars and fillers
Coating systems for facade and steel surfaces, with products from manufacturers such as Jotun, Filli Boya and Kanat Boya. Repair mortars and fillers for fibre cement and concrete surfaces.
Silicones and sealants
Silicone, polyurethane sealant and similar products for joints, junctions and sealing, with brands such as Selsil, Henkel and Dayson.
Metal facade elements
Perforated metal and metal mesh facade elements, coated corrugated cladding and accessories. Elements with custom sizes and patterns are produced at our fabrication and CNC facility.
Consumables
Auxiliary materials needed during installation, such as tapes, mesh, corner profiles, and cutting and drilling consumables.
Our own fabrication and sales
We fabricate some of the products we sell in our own facilities, for example subframe and framing members and machined fibre cement boards. Other products come from the manufacturers we partner with. We can cut boards to the size you need and machine their surfaces and edges, so parts reach site ready to fit and waste goes down.
Brands
You can find the list of brands we work with, and their official websites, on our brands page. Product catalogues are available on our catalogue page.
Choosing the right subframe and fixings
In facade cladding, the subframe and fixings that carry the board are as important as the board itself. When preparing a material list, we suggest answering these questions:
- What type of wall will the cladding go on: reinforced concrete, brick, aerated concrete or a steel frame?
- What are the weight and panel sizes of the cladding material?
- How tall is the building, and how exposed is the facade to wind?
- Will the subframe be galvanised steel or aluminium; are the fixings compatible with it?
- With which type of anchor, and at how many points, will the insulation board be fixed?
This information is needed to prepare a product list that is compatible and complete.
Choosing products for the Black Sea climate
In Samsun and along the Black Sea coast, humidity and salty air matter especially for fixings and metal profiles. Near the coast, corrosion-resistant screws and rivets must be chosen, isolators used where different metals meet, and the galvanising protected at cut edges. Coatings and sealants suited to outdoor conditions should also be chosen.
Storage and handling
Fibre cement and cement-bonded particle boards should be stacked on a flat, dry base, protected from moisture, as the manufacturer recommends. Boards with impact-sensitive edges should be protected during transport. Stone wool and other insulation boards should be kept out of the rain, and boards that get wet must not be installed until they have dried.
The difference between Betopan and fibre cement
Betopan is a cement-bonded particle board made by binding wood particles with cement; fibre cement is a board in which cement is combined with fibre reinforcement. Both are used for facades, interiors and floors; which one suits depends on where it is used, the surface finish expected and the manufacturer’s recommendations.
Ordering
- Your list: Send product, size and quantity details through the quote form or by phone. If you have a project, attach the file.
- List check: We check that the products are compatible and look for missing items.
- Quotation: Prices, stock and delivery terms are set out in the quotation. Prices are not published on the website.
- Approval and preparation: If cutting or machining is needed, fabrication is scheduled.
- Delivery: Delivery as set out in the quotation.
Technical support
Because we also use the products we sell on our own projects, we know from site experience which product suits which application. We answer questions on profile selection, anchor type, screw spacing, and sealant and membrane compatibility. For a more comprehensive technical assessment, we also offer consultancy.
Project-based supply
On large projects it is not always efficient for all the materials to arrive on site at once; site space may be limited, and material left on site for a long time can be damaged. On project orders we therefore recommend planning phased deliveries around the work programme and matching which material needs to be on site in which week to the contractor’s plan; the delivery plan should be discussed at quotation stage.
Who do we sell to?
- Facade cladding and insulation installers
- Contractors and construction sites
- Building owners carrying out repairs on their own buildings
- Projects by architectural and interior design practices
Why CREA?
- Boards, subframe, insulation and fixings from one source.
- Cutting and machining at our CNC facility in İlkadım.
- Technical support from a team that installs these products itself, backed by our team’s more than 35 years of experience.
- Material supply from our warehouse.
Ask for a price
Upload your product list or project with the quote form, and we will come back to you with stock, prices and delivery details. If you also need the facade installed, take a look at our facade cladding systems page.
Compare boards and insulation
| Material | Make-up | Main use | Technical values |
|---|---|---|---|
| Fibre cement board | Cement combined with fibre reinforcement | Facade cladding, interiors, soffits | Per manufacturer’s data sheet |
| Cement-bonded particle board | Wood particles bonded with cement | Facades, interiors and floors | Per manufacturer’s data sheet |
| Stone wool | Mineral wool board | Ventilated facades, roofs, partitions | Depends on product and density |
| EPS | Expanded polystyrene board | External insulation (ETICS) | Per manufacturer’s data sheet |
| XPS | Extruded polystyrene board | Foundations, terrace roofs, floors | Per manufacturer’s data sheet |
Thermal conductivity, fire and strength values vary by product and are given in manufacturers’ data sheets.
Frequently asked questions
Do you sell retail or wholesale?
We sell both bulk orders for projects and smaller quantities. Prices and delivery terms are set out in the quotation according to quantity and product.
Can you cut the boards I buy?
Yes. We can cut fibre cement, cement-bonded particle board, composite and other boards to the size you need at our CNC facility in İlkadım, and machine their surfaces and edges.
Where do you deliver?
Delivery and shipping terms are set out in the quotation according to the order quantity and delivery location.
How can I get a product's technical data sheet?
Technical data sheets and declarations of performance are published by the manufacturers. You can reach the manufacturers' websites from our brands page.
Can I get a sample?
You can request samples of boards and cladding products through the quote form or by phone; sample conditions vary with the product and stock.
Do you take off quantities for our project?
Yes. If you send us your project, we take off the quantities of cladding and subframe materials and prepare a quotation with the product list.
Send us your drawings, we will price them.
Attach project files, photos or links; our engineers will reply with a price and a method proposal.