Skip to content

Company

Quality and Health & Safety

For us, quality is not an option but a basic necessity. Health and safety comes before every job: no schedule and no cost target is more important than a worker’s health. On this page we explain what decides quality and safety in facade and steelwork, and how we look at it.

Where is facade quality decided?

The quality of a facade is usually decided not on the visible surface but in the layers behind it. However good the panel, an undersized anchor, a profile with no allowance for expansion, a bracket that creates a thermal bridge or a blocked air gap will cause trouble over time. That is why quality has to be considered at three stages together: in design, in fabrication and on site.

Quality in design

The first step towards quality is the shop drawing. Panel layout, joint pattern, subframe arrangement, anchor type and connection details should be drawn before going to site, and subframe and structural members should be sized by calculation. Material choice should rest on manufacturers’ technical data sheets and declarations of performance, and fire requirements should be assessed against the current text of the relevant regulation. Our approach is not just to build facades but to engineer them, and that means decisions based on calculation and documentation.

Quality in fabrication

The biggest benefit of CAD-CAM driven CNC fabrication is that parts are produced straight from the drawing, to the dimensions in the drawing. The small differences that build up with hand cutting disappear, and holes and surface work are consistent. In steel fabrication, technologies such as plasma cutting and laser welding raise the quality of cutting and welding. Good practice in fabrication means checking the first parts against the drawing before series production, inspecting welded connections, and carrying out surface preparation and corrosion protection to the coating manufacturer’s instructions.

Quality on site

On site, quality starts with checking grid lines, levels and the condition of the existing structure before work begins. Anchor, subframe and panel installation should be followed step by step, and joints that must be watertight should be checked separately during installation. Putting right any defects and cleaning the surfaces before handover is the last, but important, step.

Health and safety in facade and steelwork

Facade and steelwork involve high-risk activities: working at height, lifting heavy loads, working with cutting and grinding machines, and welding. The main measures accepted as good practice in our industry are:

  • Risk assessment: Identifying the risks and planning the measures for every site and every job before work begins.
  • Working at height: Never starting work before scaffolds, platforms and lifelines have been checked; using safety harnesses.
  • Personal protective equipment: Hard hats, gloves, safety glasses, safety footwear and other equipment suited to the task.
  • Lifting plan: Planning the lifting of heavy panels, glass and steel members in advance, and securing the work area against the surroundings.
  • Training: Keeping workers’ health and safety training up to date.
  • Weather: No work at height in windy or wet weather; on the Black Sea coast this matters especially.
  • Recording incidents: Recording near misses and discussing measures to prevent them happening again.

For us, health and safety is not only a site matter but also a product: safety barriers, partitions and balustrades that comply with occupational health and safety regulations are among the things we fabricate. See the fabrication and CNC machining page for details.

Material documentation

The main documents that show the quality of facade materials belong to the manufacturers: technical data sheets, declarations of performance, reaction-to-fire classification reports and test reports. When choosing a material, check that these documents are current and that they cover the product in the thickness and build-up that will actually be used. You can find the manufacturers we work with on our brands page.

Environment

In CNC fabrication, planning the cutting layout in software reduces waste, and usable offcuts can go into small parts. Sending metal scrap for recycling and collecting packaging waste separately also reduce environmental impact. Durable, easy-to-maintain facade systems save both material and energy over the life of the building.

Maintenance is part of quality

Even a well-built facade can develop problems if it is not maintained. Checking joints, fixings, drip edges and drainage points at regular intervals, and repairing small damage before it grows, extends the life of the facade. One advantage of mechanically fixed facades is that a damaged panel can be replaced without disturbing its neighbours.

The cost of quality

Good workmanship can look more expensive at first. But once you count the water leaks, corrosion, panel replacements and scaffolding that a wrong detail causes over the years, the job done right always turns out to be the more economical one.

Continuous improvement

Every problem met on site is a lesson to prevent on the next project. We value feedback, positive or negative, from clients, partners, architects and engineers, and our blog is part of that open conversation.

For our approach to people, see the Respect for People page.

Send us your drawings, we will price them.

Attach project files, photos or links; our engineers will reply with a price and a method proposal.